SVF©
special service ball valves |
High
Pressure |
Applications
For high pressure gas or liquid
applications throughout the process
industries. The design features:
Pressures
to 5,000 psi
Acetal-Resin thrust
bearings
Thermal vent hole in ball
Specifications
Sizes: 1/4" to 2"
Materials: 316SS, CS
Pressure: Vacuum to 5,000 psi
Temperature: -50 to 180°F
Ends: NPT, SW, Flanged
150 -
2500#
Port: Reduced
|
Three
Way & Diverter Valves |
Applications
For diverting the flow of fluids
throughout the process industries.
Diverter valves feature:
Variety of flow patterns
Line sizes to 6"
Side or bottom porting
Specifications
Sizes: 1/2" to 6"
Materials: 316SS, CS
Pressure: Vacuum to 2,000 psi
Temperature: -50 to 450°F
Ends: NPT, BW, SW, Tube
OD-BW,
Flanged & Tri-clamp
Port: Full or reduced
|
Steam
& Thermal Fluids-N6/7 |
Applications
For high temperature applications
throughout the process industries.
Steam & Thermal valves feature:
Graphoil body
seal
Live-loaded
stem seals
High
temperature seats
Specifications
Sizes: 1/4" to 4"
Materials: 316SS, CS, A20
Pressure: Vacuum to 1,500 psi
Temperature: -50 to 650°F
Ends: NPT, BW, SW, Flanged
Port: Full or Reduced
|
Chlorine
Ball Valves-C6/7/32 |
Applications
For critical shutoff and control
applications throughout the process
industries. The chlorine valve
design features:
Meets
Chlorine Institute
specifications
Relief hole in ball
Live-loaded stem seals
Specifications
Sizes: 1/4" to 4"
Materials: 316SS
Pressure: Vacuum to 2,000 psi
Temperature: -50 to 450°F
Ends: NPT, BW, SW, Tube
OD-BW,
Flanged, Tri-clamp or
ACME
Port: Full or Reduced
|
Special
Services Valves |
Products
Fugitive Emission Module
Searching gas and ammonia
Vacuum service
Cleaning for oxygen
Cryogenic valves
Dual-containment valves
Compliance
Standards
ANSI - NACE
ASTM - Chlorine Institute
MSS - Anhydrous Ammonia
ISO - & LP Gas
DIN
|
|